Bauer Eishockey Ice skate VAPOR X-LS Blue Edition with t-blade system Features: Holder black, Runner black, Stabilizer black with plastic screw connection, Clip black, Waxed Laces black   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

  Bauer Eishockey Ice skate VAPOR X-LS with t-blade system Features: Holder white, Runner white, Stabilizer black with plastic screw connection, Clip metallic-green!   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

  Bauer Eishockey Ice skate VAPOR X-LS Black Green Edition with t-blade system Features: Holder black, Runner black, Stabilizer green laquered with metal screw connection, Clip green laquered!   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

Bauer S23 Ice Skates Black-Yellow with t-blade blade system Features: black holder, yellow stabilizers with plastic screws, black runner, chrome clip Ice hockey skates with t-blade runner system for ambitious leisure and hobby players.Outer material:Combined quarters, injected composite tissueLining material:microfibertongue construction:Anatomical one-piece feltAnkle Pads:Anaform foam ankle padsfootbed:standard comfortskid construction:t bladeWhy t-blade?The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating.It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time.The interchangeable knives are available in 18 different geometries and allow adaptation to different ice conditions and the demands of the runner.advantagesImmediately ready for use without grindingThere is no need to regrind the edgesFast runner changeReplacement of components by the userEasy adjustment to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant planing surface length / rocker shapefeaturesThe t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high level of processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself.The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t?blade system can be used up to a maximum user weight of 120 kg and withstands temperatures of up to around -25 degrees Celsius.The heart of the t-blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash.In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner.t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner.On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations. Bauer Größe Weite RUSEURUKCMt-blade Systemgröße      67,540,56,525,124878,5427,52625689,5438,526,8264910,544,59,527,72721011,545,510,528,52801112,54711,529,42881213,54812,530,2300

Bauer S23 Ice Skates Black-White with t-blade blade system   Features: black holder, white stabilizers with plastic screws, black runner, white clip   Ice hockey skates with t-blade runner system for ambitious leisure and hobby players. Outer material:Combined quarters, injected composite tissue Lining material:microfiber tongue construction:Anatomical one-piece felt Ankle Pads:Anaform foam ankle pads footbed:standard comfort skid construction:t bladeWhy t-blade? The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating. It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time. The interchangeable knives are available in 18 different geometries and allow adaptation to different ice conditions and the demands of the runner. advantages Immediately ready for use without grindingThere is no need to regrind the edgesFast runner changeReplacement of components by the userEasy adjustment to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant planing surface length / rocker shapefeatures The t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high level of processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself. The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t?blade system can be used up to a maximum user weight of 120 kg and withstands temperatures of up to around -25 degrees Celsius. The heart of the t?blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash. In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner. t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner. On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.   Bauer Größe Weite R US EUR UK CM t-blade Systemgröße             6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300

Bauer S23 Schlittschuhe Black-Yellow-Neon mit t-blade Kufensystem   Features: Holder schwarz, Stabilisatoren neon-gelb mit Kunststoffverschraubung, Runner schwarz, Clip neon-gelb    Eishockeyschlittschuhe mit t-blade Kufensystem für den ambitionierten Freizeit- und Hobbyspieler. Außenmaterial: Kombiniertes Quartier, injiziertes Composite Gewebe Futtermaterial: Mirkrofaser Zungenkonstruktion: Anatomischer einteiliger Filz Knöchelpolster: Knöchelpolster aus Anaform-Schaumstoff Fußbett: Standardkomfort Thermoformbares Obermaterial Kufenkonstruktion: t-blade Warum t-blade? Das t-blade System ist ein patentiertes weltweit einzigartiges Kufensystem für Schlittschuhe und zeichnet sich durch hervorragende thermische und dynamische Eigenschaften auf dem Eis aus. Die revolutionäre Produktidee steht für Innovation und Qualität MADE IN GERMANY und bietet dem Läufer weit mehr als Spaß am Eislaufen. Als einziges Kufensystem ist es sofort im Lieferzustand einsatzbereit, da die Wechselmesser bereits fertig geschliffen sind. Ein lästiges Nachschleifen der Kufenkante entfällt ebenfalls, durch den schnellen Austausch der Wechselmesser hat man innerhalb kürzester Zeit wieder einen tadellosen Schliff. Die Wechselmesser sind in 18 verschiedenen Geometrien erhältlich und erlauben eine Anpassung an unterschiedliche Eisverhältnisse und Ansprüche des Läufers. Vorteile Sofort einsatzbereit ohne Schleifen Nachschleifen der Kanten entfällt Schneller Runner-Wechsel Austausch der Komponenten durch den Nutzer Einfache Anpassung an unterschiedliche Eisverhältnisse Verringertes Verletzungsrisiko Sehr leicht Bruchsicher Kleine Kurvenradien Hohe Kurvengeschwindigkeit Hervorragende Wendigkeit Exzellente Gleiteigenschaften Bis zu 4 mal längere Nutzungszeit Extreme Kantenhärte (ca. 54 HRC = 570 HV) Konstante Gleitflächenlänge / Rockerform Merkmale Das t-blade Kufensystem zeichnet sich sowohl durch einzigartige konstruktive Merkmale als auch durch herausragende laufdynamische Eigenschaften aus. Eine hohe Verarbeitungsqualität sowie das geniale Prinzip der Wechselmesser garantieren Stabilität und lange Nutzungsdauer des Systems in Verbindung mit Servicefreundlichkeit, da der Nutzer den Austausch der Komponenten selbst vornehmen kann. Das dreiteilige t-blade Kufensystem besteht aus Holder, Stabilisatoren und Runner. Alle Systemteile werden aus einem speziellen verstärkten und kälteschlagzähen Kunststoff hergestellt und verfügen über eine hervorragende Splitter-Bruchsicherheit. Gleichzeitig handelt es sich um die weltweit leichteste Schlittschuhkufe am Markt. Das t?blade System ist bis zu einem Nutzergewicht von max. 120 Kg belastbar und hält Temperaturen von bis zu ca. -25 Grad Celsius aus. Das Herzstück des t?blade Systems sind die extrem präzise gefertigten Wechsel-Runner. In den verstärkten Kunststoff ist ein dünner, hochglanzpolierter Streifen aus hochfestem Stahl eingegossen, der die Lauffläche bildet. Die niedrige Gesamtmasse an Stahl sorgt für ein sehr niedriges Gesamtgewicht und exzellente thermische Eigenschaften der Runner auf dem Eis. Die Gleiteigenschaften sind dadurch bis zu 40% besser als bei herkömmlichen Messern und der hochfeste Stahl erlaubt eine bis zu 4 mal längere Nutzungszeit. Wenn der Runner verschlissen ist, kann er blitzschnell ausgetauscht werden. Zudem ermöglicht eine Vielzahl an verschiedenen Runner Geometrien, die sich in Gleitflächenlänge und Hohlradius unterscheiden, dem Läufer die exakte Anpassung an die aktuellen Eisverhältnisse und seine laufdynamischen Ansprüche durch Wechsel der Runner. t-blade Wechsel-Runner erreichen Spitzenwerte bei laufdynamischen Bereichen wie Gleitfähigkeit, Wendigkeit, Bremsverzögerung, Kurvenaggressivität und Kurvengeschwindigkeit, was durch die FH Furtwangen ebenso bestätigt wurde wie die daraus resultierenden geringeren Belastungen an Gelenken und Bändern des Läufers. An der Rückseite des Holders befindet sich ein auswechselbarer Clip mit t-blade Logo, der wie die Stabilisatoren und die Runner in mehreren Farben erhältlich ist. Das t-blade Kufensystem bietet somit individuelle Gestaltungsmöglichkeiten durch zahlreiche Farbkombinationen.     Bauer Größe Weite R US EUR UK CM t-blade Systemgröße             6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288            

Bauer Supreme M3 t-blade Ice Skates Black Gold Edition   The Supreme M3 is the perfect skate with performance and comfort. The Digi Comp outer material ensures very good stability and power transmission. The lightweight ankle pad made of memory foam and the sublimated inner material made of hydrophoic microfibre offer comfort and a perfect fit. The 40 oz. Felt tongue with mesh midfoot protection provide additional protection and flex. The TUUK Lightspeed Edge blade holders with stainless steel blade enable optimal grip and speed on the ice.   Features: black holder, metallic-gold stabilizers with metal screws, black runner, metallic-gold clip   Outer material:Digi Comp material Inner material:Sublimated HYDROPHOBIC microfiber Ankle Pads:lightweight memory foam footbed:die-cut EVA material tongue construction:40 OZ felt tongue with mesh metatarsal protection Outsole:Digi comp material skid construction:t blade Why t-blade? The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating. It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time. The interchangeable knives are available in 18 different geometries and allow adaptation to different ice conditions and the demands of the runner. advantages Immediately ready for use without grindingThere is no need to regrind the edgesFast runner changeReplacement of components by the userEasy adjustment to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant planing surface length / rocker shapefeatures The t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high level of processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself. The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t?blade system can be used up to a maximum user weight of 120 kg and withstands temperatures of up to around -25 degrees Celsius. The heart of the t?blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash. In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner. t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner. On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.   Bauer size 2E   US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 5,5 6,5 39 6 24,7 248 6 7,5 40,5 6,5 25,1 248 6,5 8 41 7 25,5 256 7 8,5 42 7,5 26 256 7,5 9 42,5 8 26,4 264 8 9,5 43 8,5 26,8 264 8,5 10 44 9 27,2 272 9 10,5 44,5 9,5 27,7 272 9,5 11 45 10 28,1 280 10 11,5 45,5 10,5 28,5 280 10,5 12 46 11 28,9 288 11 12,5 47 11,5 29,4 288 11,5 13 47,5 12 29,8 300 12 13,5 48 12,5 30,2 300

auer Vapor Select t-blade ice skate Black Red Edition The BAUER Vapor Select is based on the Vapor The 40oz tongue with HD foam provides maximum comfort and protection from impacts to the foot. The sublimated inner material ensures a sporty look and a comfortable fit. Features: t-blade holder black, t-blade runner black, t-blade stabilizers metallic red with metal screw connection, t-blade clip metallic red, copper rivets at the back   Tongue: 40oz tongue with HD foam insert Toe cap: standard toe capFacing Flex: Standard lacingOutsole: Digi Comp for optimal power transfer and stabilityInner material: Sublimated inner material for a sporty look and comfortable fitThermoformableWidth: EE (width D on request) Why t-blade? The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating. It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time.   advantages Immediately ready for use without grindingThere is no need to regrind the edgesFast runner changeReplacement of components by the userEasy adjustment to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant planing surface length / rocker shape features The t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself. The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t'blade system can be loaded up to a user weight of max. 120 kg and withstands temperatures of up to approx. -25 degrees Celsius. The heart of the t'blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash. In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner. t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner. On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer size 2E US EUR UK CM t-blade Systemsize 5  6 38,5 5,5 24,3 248 5,5 6,5 39 6 24,7 248 6 7,5 40,5 6,5 25,1 248 6,5 8 41 7 25,5 256 7 8,5 42 7,5 26 256 7,5 9 42,5 8 26,4 264 8 9,5 43 8,5 26,8 264 8,5 10 44 9 27,2 272 9 10,5 44,5 9,5 27,7 272 9,5 11 45 10 28,1 280 10 11,5 45,5 10,5 28,5 280 10,5 12 46 11 28,9 288 11 12,5 47 11,5 29,4 288 11,5 13 47,5 12 29,8 288 12 13,5 48 12,5 30,2 300

  Bauer Eishockey Ice skate VAPOR X-LS Green Edition with t-blade system Features: Holder painted Green, Runner black, Stabilizer black with metal screws, Clip black!   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

  Bauer Eishockey Ice skate VAPOR X-LS Black White with t-blade system Features: Holder black, Runner black, Stabilizer white with plastic screw connection, Clip white!   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

Bauer X t-blade ice skate Black Edition   The Bauer X ice hockey skate is the perfect combination of Vapor and Supreme. With a medium-hard sole and top, it offers an ideal balance of stability and flexibility on the ice. The 30 oz felt tongue provides additional protection and comfort for your feet. The standard toe cap and TPR outer material make this skate robust and durable. Memory foam ankle padding ensures a comfortable fit.   Features: Holder black, stabilizer metallic blue, runner black, clip metallic blue     Shoe technology: Outer material:One-piece polycarb 3D quartersInner material:Microfiber Knuckle protection:Memory foam ankle pads Footbed:Molded EVA Tongue construction:30 oz. Felt tongue with metatarsal protection Outsole:TPR Skid construction:t-blade ThermoformableFurther Why t-blade? The t-blade system is a patented blade system for ice skates that is unique in the world and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the runner much more than just the fun of ice skating. It is the only skid system that is ready for use as soon as it is delivered, as the interchangeable blades are already sharpened. There is also no need for annoying regrinding of the edge of the runners; thanks to the quick replacement of the interchangeable blades, you can have a flawless finish again within a very short time. Advantages Ready to use immediately without sandingThere is no need to regrind the edgesQuick runner changeReplacement of components by the userEasy to adapt to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant sliding surface length / rocker shapecharacteristics The t-blade skid system is characterized by both unique design features and outstanding dynamic running properties. A high quality of workmanship and the ingenious principle of the interchangeable blades guarantee stability and a long service life of the system combined with ease of service, as the user can replace the components themselves. The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special reinforced and cold-impact-resistant plastic and are excellently resistant to splinters and breakage. At the same time, it is the world's lightest ice skate blade on the market. The t’blade system can withstand a user weight of up to 120 kg and can withstand temperatures of up to around -25 degrees Celsius. The heart of the t’blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties for the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows a usage time that is up to 4 times longer. If the runner is worn out, it can be replaced in a flash. In addition, a variety of different runner geometries, which differ in sliding surface length and hollow radius, enable the runner to precisely adapt to the current ice conditions and their dynamic running requirements by changing the runners. t-blade alternating runners achieve top values in running dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the runner's joints and ligaments. On the back of the holder there is a replaceable clip with the t-blade logo, which, like the stabilizers and runners, is available in several colors. The t-blade skid system offers individual design options through numerous color combinations. Bauer size R    US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 5,5 6,5 39 6 24,7 248 6 7,5 40,5 6,5 25,1 248 6,5 8 41 7 25,5 256 7 8,5 42 7,5 26 256 7,5 9 42,5 8 26,4 264 8 9,5 43 8,5 26,8 264 8,5 10 44 9 27,2 272 9 10,5 44,5 9,5 27,7 272 9,5 11 45 10 28,1 280 10 11,5 45,5 10,5 28,5 280 10,5 12 46 11 28,9 288 11 12,5 47 11,5 29,4 288 11,5 13 47,5 12 29,8 300 12 13,5 48 12,5 30,2 300

Bauer ice hockey skates X-LP Black Edition with t-blade runner system Features: Black holder, black runner, blue metallic stabilizers with metal screws, metallic blue clip. • Outer material: 3D Poly Carb• Inner material: microfiber• Anaform foam ankle pads• Anatomical 2 piece 30oz felt tongue• Footbed: EVA foam• Outsole: TPS (thermoplastic)• With the t-blade interchangeable blade system, the ice skate is immediately ready for use Why t-blade?The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating.It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time. advantages• Ready to use without grinding• Regrinding of the edges is no longer necessary• Fast runner change• Replacement of components by the user• Easy adaptation to different ice conditions• Reduced risk of injury• Very easy• Shatterproof• Small curve radii• High cornering speed• Excellent maneuverability• Excellent gliding properties• Up to 4 times longer usage time• Extreme edge hardness (approx. 54 HRC = 570 HV)• Constant planing surface length / rocker shape featuresThe t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high level of processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself.The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t'blade system can be loaded up to a user weight of max. 120 kg and withstands temperatures of up to approx. -25 degrees Celsius.The heart of the t-blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash.In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner.t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner.On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations. Bauer skate size chart Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

  Bauer ice hockey skates X-LP Blue Edition with t-blade blade system Features: Holder painted blue, runner black, stabilizers black with metal screws, clip black. • Outer material: 3D Poly Carb• Inner material: microfiber• Anaform foam ankle pads• Anatomical 2 piece 30oz felt tongue• Footbed: EVA foam• Outsole: TPS (thermoplastic)• With the t-blade interchangeable blade system, the ice skate is immediately ready for use Why t-blade?The t-blade system is a patented, worldwide unique blade system for ice skates and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just having fun ice skating.It is the only skid system that is ready to use as soon as it is delivered, as the interchangeable knives are already ground. Annoying regrinding of the runner edge is also no longer necessary, thanks to the quick exchange of the exchangeable knives you have a perfect grind again within a very short time. advantages• Ready to use without grinding• Regrinding of the edges is no longer necessary• Fast runner change• Replacement of components by the user• Easy adaptation to different ice conditions• Reduced risk of injury• Very easy• Shatterproof• Small curve radii• High cornering speed• Excellent maneuverability• Excellent gliding properties• Up to 4 times longer usage time• Extreme edge hardness (approx. 54 HRC = 570 HV)• Constant planing surface length / rocker shape featuresThe t-blade skid system is characterized by unique design features as well as outstanding dynamic properties. A high level of processing quality and the ingenious principle of the interchangeable knives guarantee stability and a long service life of the system in connection with service friendliness, since the user can replace the components himself.The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special, reinforced, low-temperature impact-resistant plastic and have excellent splinter resistance. At the same time, it is the world's lightest ice skate blade on the market. The t'blade system can be loaded up to a user weight of max. 120 kg and withstands temperatures of up to approx. -25 degrees Celsius.The heart of the t-blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties of the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer service life. If the runner is worn out, it can be replaced in a flash.In addition, a large number of different runner geometries, which differ in the length of the sliding surface and the hollow radius, enable the runner to adapt exactly to the current ice conditions and their running dynamic requirements by changing the runner.t-blade interchangeable runners achieve top values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the joints and ligaments of the runner.On the back of the holder there is an exchangeable clip with the t-blade logo, which, like the stabilizers and the runners, is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations. Bauer skate size chart Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,7 248 6 7,5 40,5 6,5 25,4 248 7 8,5 42 7,5 26,4 256 8 9,5 43 8,5 27,3 264 9 10,5 44,5 9,5 28,1 272 10 11,5 45,5 10,5 29,0 280 11 12,5 47 11,5 29,8 288 12 13,5 48 12,5 30,6 300  

Bauer Schlittschuhe X-LS t-blade Schlittschuh Black metallic-green   Außenmaterial: Quartier aus Spritzguss-Verbundgewebe Futtermaterial: Microfaser Knöchelpolster aus Anaform-Schaumstoff Zunge: 2-teilige 30-oz-Filzzunge mit Mittelfußschutz Der geformte Mittelfußschutz hält Schläge ab und unterstützt die Stabilität des Fußes Fußbett: EVA-Schaum t-blade Kufensystem Mit dem t-blade Wechselkufensystem ist der Schlittschuh sofort einsatzbereit   Warum t-blade? Das t-blade System ist ein patentiertes weltweit einzigartiges Kufensystem für Schlittschuhe und zeichnet sich durch hervorragende thermische und dynamische Eigenschaften auf dem Eis aus. Die revolutionäre Produktidee steht für Innovation und Qualität MADE IN GERMANY und bietet dem Läufer weit mehr als Spaß am Eislaufen. Als einziges Kufensystem ist es sofort im Lieferzustand einsatzbereit, da die Wechselmesser bereits fertig geschliffen sind. Ein lästiges Nachschleifen der Kufenkante entfällt ebenfalls, durch den schnellen Austausch der Wechselmesser hat man innerhalb kürzester Zeit wieder einen tadellosen Schliff. Vorteile Sofort einsatzbereit ohne Schleifen Nachschleifen der Kanten entfällt Schneller Runner-Wechsel Austausch der Komponenten durch den Nutzer Einfache Anpassung an unterschiedliche Eisverhältnisse Verringertes Verletzungsrisiko Sehr leicht Bruchsicher Kleine Kurvenradien Hohe Kurvengeschwindigkeit Hervorragende Wendigkeit Exzellente Gleiteigenschaften Bis zu 4 mal längere Nutzungszeit Extreme Kantenhärte (ca. 54 HRC = 570 HV) Konstante Gleitflächenlänge / Rockerform Merkmale Das t-blade Kufensystem zeichnet sich sowohl durch einzigartige konstruktive Merkmale als auch durch herausragende laufdynamische Eigenschaften aus. Eine hohe Verarbeitungsqualität sowie das geniale Prinzip der Wechselmesser garantieren Stabilität und lange Nutzungsdauer des Systems in Verbindung mit Servicefreundlichkeit, da der Nutzer den Austausch der Komponenten selbst vornehmen kann. Das dreiteilige t-blade Kufensystem besteht aus Holder, Stabilisatoren und Runner. Alle Systemteile werden aus einem speziellen verstärkten und kälteschlagzähen Kunststoff hergestellt und verfügen über eine hervorragende Splitter-Bruchsicherheit. Gleichzeitig handelt es sich um die weltweit leichteste Schlittschuhkufe am Markt. Das t’blade System ist bis zu einem Nutzergewicht von max. 120 Kg belastbar und hält Temperaturen von bis zu ca. -25 Grad Celsius aus. Das Herzstück des t-blade Systems sind die extrem präzise gefertigten Wechsel-Runner. In den verstärkten Kunststoff ist ein dünner, hochglanzpolierter Streifen aus hochfestem Stahl eingegossen, der die Lauffläche bildet. Die niedrige Gesamtmasse an Stahl sorgt für ein sehr niedriges Gesamtgewicht und exzellente thermische Eigenschaften der Runner auf dem Eis. Die Gleiteigenschaften sind dadurch bis zu 40% besser als bei herkömmlichen Messern und der hochfeste Stahl erlaubt eine bis zu 4 mal längere Nutzungszeit. Wenn der Runner verschlissen ist, kann er blitzschnell ausgetauscht werden. Zudem ermöglicht eine Vielzahl an verschiedenen Runner Geometrien, die sich in Gleitflächenlänge und Hohlradius unterscheiden, dem Läufer die exakte Anpassung an die aktuellen Eisverhältnisse und seine laufdynamischen Ansprüche durch Wechsel der Runner. t-blade Wechsel-Runner erreichen Spitzenwerte bei laufdynamischen Bereichen wie Gleitfähigkeit, Wendigkeit, Bremsverzögerung, Kurvenaggressivität und Kurvengeschwindigkeit, was durch die FH Furtwangen ebenso bestätigt wurde wie die daraus resultierenden geringeren Belastungen an Gelenken und Bändern des Läufers. An der Rückseite des Holders befindet sich ein auswechselbarer Clip mit t-blade Logo, der wie die Stabilisatoren und die Runner in mehreren Farben erhältlich ist. Das t-blade Kufensystem bietet somit individuelle Gestaltungsmöglichkeiten durch zahlreiche Farbkombinationen. Bauer Schlittschuh Größentabelle Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300    

Bauer Eishockey Schlittschuhe X-LS Green Black Edition mit t-blade Kufensystem Features: Holder metallic-grün, Runner schwarz, Stabilisatoren schwarz mit Metallverschraubung, Clip metallic-grün, Schnürsenkel gewachst neon-grün.   Außenmaterial: 3D Poly-Carb Innenfutter: Microfaser Knöchelpolster aus Anaform-Schaumstoff erhöht den Tragekomfort und bietet einen guten Halt Anatomisch angepasste Zunge aus 30-oz Filz sorgt für guten Sitz am Fuß Fussbett: EVA-Schaum Mit dem t-blade Wechselkufensystem ist der Schlittschuh sofort einsatzbereit   Warum t-blade? Das t-blade System ist ein patentiertes weltweit einzigartiges Kufensystem für Schlittschuhe und zeichnet sich durch hervorragende thermische und dynamische Eigenschaften auf dem Eis aus. Die revolutionäre Produktidee steht für Innovation und Qualität MADE IN GERMANY und bietet dem Läufer weit mehr als Spaß am Eislaufen. Als einziges Kufensystem ist es sofort im Lieferzustand einsatzbereit, da die Wechselmesser bereits fertig geschliffen sind. Ein lästiges Nachschleifen der Kufenkante entfällt ebenfalls, durch den schnellen Austausch der Wechselmesser hat man innerhalb kürzester Zeit wieder einen tadellosen Schliff. Vorteile Sofort einsatzbereit ohne Schleifen Nachschleifen der Kanten entfällt Schneller Runner-Wechsel Austausch der Komponenten durch den Nutzer Einfache Anpassung an unterschiedliche Eisverhältnisse Verringertes Verletzungsrisiko Sehr leicht Bruchsicher Kleine Kurvenradien Hohe Kurvengeschwindigkeit Hervorragende Wendigkeit Exzellente Gleiteigenschaften Bis zu 4 mal längere Nutzungszeit Extreme Kantenhärte (ca. 54 HRC = 570 HV) Konstante Gleitflächenlänge / Rockerform Merkmale Das t-blade Kufensystem zeichnet sich sowohl durch einzigartige konstruktive Merkmale als auch durch herausragende laufdynamische Eigenschaften aus. Eine hohe Verarbeitungsqualität sowie das geniale Prinzip der Wechselmesser garantieren Stabilität und lange Nutzungsdauer des Systems in Verbindung mit Servicefreundlichkeit, da der Nutzer den Austausch der Komponenten selbst vornehmen kann. Das dreiteilige t-blade Kufensystem besteht aus Holder, Stabilisatoren und Runner. Alle Systemteile werden aus einem speziellen verstärkten und kälteschlagzähen Kunststoff hergestellt und verfügen über eine hervorragende Splitter-Bruchsicherheit. Gleichzeitig handelt es sich um die weltweit leichteste Schlittschuhkufe am Markt. Das t’blade System ist bis zu einem Nutzergewicht von max. 120 Kg belastbar und hält Temperaturen von bis zu ca. -25 Grad Celsius aus. Das Herzstück des t-blade Systems sind die extrem präzise gefertigten Wechsel-Runner. In den verstärkten Kunststoff ist ein dünner, hochglanzpolierter Streifen aus hochfestem Stahl eingegossen, der die Lauffläche bildet. Die niedrige Gesamtmasse an Stahl sorgt für ein sehr niedriges Gesamtgewicht und exzellente thermische Eigenschaften der Runner auf dem Eis. Die Gleiteigenschaften sind dadurch bis zu 40% besser als bei herkömmlichen Messern und der hochfeste Stahl erlaubt eine bis zu 4 mal längere Nutzungszeit. Wenn der Runner verschlissen ist, kann er blitzschnell ausgetauscht werden. Zudem ermöglicht eine Vielzahl an verschiedenen Runner Geometrien, die sich in Gleitflächenlänge und Hohlradius unterscheiden, dem Läufer die exakte Anpassung an die aktuellen Eisverhältnisse und seine laufdynamischen Ansprüche durch Wechsel der Runner. t-blade Wechsel-Runner erreichen Spitzenwerte bei laufdynamischen Bereichen wie Gleitfähigkeit, Wendigkeit, Bremsverzögerung, Kurvenaggressivität und Kurvengeschwindigkeit, was durch die FH Furtwangen ebenso bestätigt wurde wie die daraus resultierenden geringeren Belastungen an Gelenken und Bändern des Läufers. An der Rückseite des Holders befindet sich ein auswechselbarer Clip mit t-blade Logo, der wie die Stabilisatoren und die Runner in mehreren Farben erhältlich ist. Das t-blade Kufensystem bietet somit individuelle Gestaltungsmöglichkeiten durch zahlreiche Farbkombinationen. Bauer Schlittschuh Größentabelle   Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300    

  Features: Holder black, Runner black, stabilizers laquered red with plastic screw connection, clip metallic-chrome!  Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam increases comfort and provides a firm grip Anatomically adapted tongue made of 30 oz felt ensures a good fit on the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use   Why t-blade?  The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300

BAUER X250 t-blade Ice Skate Pink Edition Features: Holder pink, Runner black, Stabilizer black with metal screw connection, Clip black   Upper material: quartier made of injection-mold composite fabric Inner lining: microfiber Ankle padding from Anaform foam Tongue: 2-piece 30 oz felt tongue with metatarsal protection The molded metatarsal protection stops impacts and supports the stability of the foot Footbed: EVA foam With the t-blade interchangeable skate system, the skate is ready for immediate use  Why t-blade?  The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     Bauer Size US EUR UK CM t-blade Systemgröße 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300  

CCM Tacks AS 550 t-blade Ice Skate Black Edition Features: Black holder, yellow stabilizers with plastic nuts, neon yellow clip, black runner.     The CCM Tacks AS-550 Ice Hockey Skates are perfect for those looking for a fist pair of ice skates to be used for recreational skating or to get started out playing Ice Hockey. The quarter package has enhanced structural support with longer-lasting durability to provide better performance on each stride.   Quarter Package: 3D injected package - Ergonomic boot-shaping system for great comfort and new texturized finish for improved durability. Stiffness: 115 - Solid core for good skating performance Liner: HD microfibre - Ergonomic boot-shaping system for great comfort and new texturized finish for improved durability. Tongue: Felt tongue - 5mm felt with added foam for comfort and protection  Footbed: CCM footbed - Provides support and comfort Runner System : Patented t-blade runner system with replaceable blades     Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     CCM Size US EUR UK CM t-blade system size 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300    

CCM Tacks AS 550 - Ice Hockey Skate with t-blade Runner System   Features: Black white, black stabilizers with plastic nuts and metall screws, clip black, white runner   The CCM Tacks AS-550 Ice Hockey Skates are perfect for those looking for a fist pair of ice skates to be used for recreational skating or to get started out playing Ice Hockey. The quarter package has enhanced structural support with longer-lasting durability to provide better performance on each stride.   Quarter Package: 3D injected package - Ergonomic boot-shaping system for great comfort and new texturized finish for improved durability. Stiffness: 115 - Solid core for good skating performance Liner: HD microfibre - Ergonomic boot-shaping system for great comfort and new texturized finish for improved durability. Tongue: Felt tongue - 5mm felt with added foam for comfort and protection  Footbed: CCM footbed - Provides support and comfort Runner System : Patented t-blade runner system with replaceable blades     Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     CCM Size US EUR UK CM t-blade system size 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300    

CCM Tacks AS 560 t-blade Ice Skate Black Edition Features: black holder, metallic-gold stabilizers with metal screws, metallic-gold clip, black runner.   The CCM Tacks AS-560 Hockey Skates are designed for the recreational or just starting out player looking for a reliable and durable skate.   The CCM Tacks AS 560 ice skate with t-blade blade system is equipped with: quarter package3D Injection Package - Ergonomic boot shaping system for great comfort and new textured finish for improved durabilitycoreSolid core for good skating performance - Stiffness 125inner shoeHD Microfiber - Ergonomic Boot Shaping SystemTongueFelt Tongue - 7mm thick felt with added foam for comfort and protectionfootbedCCM Footbed - Provides support and comfortSKID SYSTEMPatented t-blade skid system with interchangeable blades      Why t-blade? The t-blade system is a patented skate system unique to the world and features excellent thermal and dynamic properties on ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the skater much more than just ice skating.   As the only skate system, it is immediately ready for use when it has been delivered, since the exchangeable blades are already finished. An annoying regrinding of the edge of the skiff is also eliminated, because of the quick replacement of the exchangeable knives one has again an impeccable finish within a very short time.  Advantages   extremely light excellent gliding characteristics good maneuverability high cornering speed small curve radii fracture resistant constant rocker shape geometry running edges sharpening not required above-average hardness of the running edges useful life 4 times longer rapid runner exchange  Characteristics:   The t-blade skid system is characterized by unique design features as well as outstanding dynamic characteristics. A high quality of workmanship and the ingenious principle of the exchangeable blades guarantee stability and long service life of the system in connection with Servicefreundlichkeit, since the user can carry out the replacement of the components themselves.  The three-piece t-blade skid system consists of holder, stabilizers and runners. All system parts are made of a special reinforced and cold impact resistant plastic and have an excellent splinter-resistance. At the same time it is the world's lightest ice skate on the market. The t'blade system is up to a user weight of max. 120 Kg load and can withstand temperatures of up to about -25 degrees Celsius.  At the heart of the t'blade system are the extremely precisely manufactured change-runners. In the reinforced plastic, a thin, highly polished strip of high-strength steel is poured, which forms the tread. The low total mass of steel ensures a very low total weight and excellent thermal properties of runners on the ice. The sliding properties are thus up to 40% better than with conventional knives and the high-strength steel allows up to 4 times longer usage time. If the runner is worn, it can be replaced at lightning speed.  In addition, a variety of different Runner geometries, which differ in Gleitflächenlänge and hollow radius, the runner the exact adjustment to the current ice conditions and its dynamic requirements by changing the Runner.  t-blade change runners achieve peak values ​​in dynamic areas such as gliding ability, maneuverability, braking deceleration, curve aggressiveness and cornering speed, which was confirmed by the FH Furtwangen as well as the resulting lower loads on joints and belts of the rotor.  At the back of the holder there is a replaceable clip with t-blade logo, which like the stabilizers and the runners is available in several colors. The t-blade skid system thus offers individual design options through numerous color combinations.     CCM Size US EUR UK CM t-blade system size 5 6 38,5 5,5 24,3 248 6 7,5 40,5 6,5 25,1 248 7 8,5 42 7,5 26,0 256 8 9,5 43 8,5 26,8 264 9 10,5 44,5 9,5 27,7 272 10 11,5 45,5 10,5 28,5 280 11 12,5 47 11,5 29,4 288 12 13,5 48 12,5 30,2 300    

Graf G975 t-blade ice skate Back Red Edition The new skate ULTRA G975 from Graf impresses at first glance with cool designs on the side panels, a real eye-catcher! But the skate has more to offer than just design: Features, holder black, stabilizer metallic red, clip metallic red, runner black, and COPPER RIVETS at the back! The 3D shaped composite material is anatomically shaped and combined with perfect shape comfort. The memory foam ankle pad completes the fit and comfort of the skate. This results in an extremely firm footing for power transmission to the ice and high protection against hits or shots.The outsole made of PE contributes to good power transfer.The new cap with anatomical toe shape offers maximum protection.The interior of the ULTRA G 975 is made of brush nylon, quick-drying and breathable.The “Comfortfeet” foot sole completes the comfortable feel.The 7 mm felt tongue offers protection and adapts 100% to the instep, but offers the best mobility in all situations.t-blade skid systemThe t-blade system is a patented blade system for ice skates that is unique in the world and is characterized by excellent thermal and dynamic properties on the ice. The revolutionary product idea stands for innovation and quality MADE IN GERMANY and offers the runner much more than just the fun of ice skating. It is the only skid system that is ready for use as soon as it is delivered, as the interchangeable blades are already sharpened. There is also no need for annoying regrinding of the edge of the runners; thanks to the quick replacement of the interchangeable blades, you can have a flawless finish again within a very short time. The interchangeable blades are available in 18 different geometries and allow adjustment to different ice conditions and the needs of the runner. Advantages Ready to use immediately without sandingThere is no need to regrind the edgesQuick runner changeReplacement of components by the userEasy to adapt to different ice conditionsReduced risk of injuryVery easyShatterproofSmall curve radiiHigh cornering speedExcellent maneuverabilityExcellent gliding propertiesUp to 4 times longer usage timeExtreme edge hardness (approx. 54 HRC = 570 HV)Constant sliding surface length / rocker shapecharacteristics The t-blade skid system is characterized by both unique design features and outstanding dynamic running properties. A high quality of workmanship and the ingenious principle of the interchangeable blades guarantee stability and a long service life of the system combined with ease of service, as the user can replace the components themselves.The three-part t-blade skid system consists of holder, stabilizers and runner. All system parts are made from a special reinforced and cold-impact-resistant plastic and are excellently resistant to splinters and breakage. At the same time, it is the world's lightest ice skate blade on the market. The t-blade system can withstand a user weight of up to 120 kg and can withstand temperatures of up to around -25 degrees Celsius.The heart of the t-blade system are the extremely precisely manufactured interchangeable runners. A thin, highly polished strip of high-strength steel is cast into the reinforced plastic to form the tread. The low total mass of steel ensures a very low overall weight and excellent thermal properties for the runners on the ice. The gliding properties are up to 40% better than with conventional knives and the high-strength steel allows a usage time that is up to 4 times longer. If the runner is worn out, it can be replaced in a flash.In addition, a variety of different runner geometries, which differ in sliding surface length and hollow radius, enable the runner to precisely adapt to the current ice conditions and their dynamic running requirements by changing the runners.t-blade alternating runners achieve top values in running dynamic areas such as gliding ability, maneuverability, braking deceleration, cornering aggressiveness and cornering speed, which was confirmed by the Furtwangen University of Applied Sciences as well as the resulting lower loads on the runner's joints and ligaments.On the back of the holder there is a replaceable clip with the t-blade logo, which, like the stabilizers and runners, is available in several colors. The t-blade skid system offers individual design options through numerous color combinations. Graf t-blade G975Größentabelle     EinlageSohlenlänge t-bladeSystemgröße EUR UK  US in cm   37 1/3 4,5 5,5 23,5 248 38 5 6 24,0 248 38 2/3 5,5 6,5 24,5 248 39 1/3 6 7 25,0 248 40 6,5 7,5 25,3 256 40 2/3 7 8 25,7 256 41 1/3 7,5 8,5 26,0 264 42 8 9 26,5 264 42 2/3 8,5 9,5 27,0 272 43 1/3 9 10 27,5 272 44 9,5 10,5 28,0 280 44 2/3 10 11 28,3 288 45 1/3 10,5 11,5 28,5 288 46 11 12 29,0 288 46 2/3 11,5 12,5 29,5 300 47 1/3 12 13 30,0 300